Describes the country's standards landscape, identifies the national standards and accreditation bodies, and lists the main national testing organization(s) and conformity assessment bodies.
Last Published: 7/31/2017
Overview
Decree 2153 of 1992 defined the Colombian standards regime’s legal framework. Decree 2153 modified the structure of the Superintendent of Industry and Commerce (SIC), and along with Decree 2269 of 1993, created the National Standardization, Certification, and Metrology System (SNNCM). The latter decree designated the Colombian Institute of Technical Standards and Certification (ICONTEC) as the main standards development organization and SIC as the national accreditation organization.

Colombia further revised its standards regime following its accession to the World Trade Organization (Law 170 of 1994).         Colombia joined the Group of Three (G-3) Trade Agreement between Colombia, Mexico, and Venezuela (Law 172 of 1994), and enacted Andean Community Decision 376 of 1995, which created the Andean Standardization, Accreditation, Assays, Certification, Technical Regulations, and Metrology System.

On February 3, 2010, per Decree 323 of 2010, the accreditation role was transferred from SIC to the Colombian National Accreditation Organization (ONAC), created by Decree 4738 of 2008, and therefore, eliminated the provisions of Decree 2269 of 1993 and Decree 2153 of 1992.

Standards
The Colombian Standards and Certification Institute (ICONTEC) is a private-sector organization created in 1963. The SIC has also accredited ICONTEC for product certification, quality assurance, and environmental systems certification.
 
ICONTEC’s principal aim is to promote the development of technical standards, quality assurance, and product certification, and is Colombia’s national standardization institute. They are members of the International Standards Organization (ISO) and the International Electro-Technical Commission (IEC). ICONTEC is a founding member of the Pan-American Technical Standards Commission (COPANT) and a member of the Pacific Area Standards Congress (PASC), the International Accreditation Forum (IAF), and IQNet, an international association of national quality assurance certification entities.
ICONTEC is also recognized by the American National Standards Institute (ANSI), the German Accreditation Association (TGA), the Chilean National Standardization Institute (INN), and the Peruvian standardization institute (INDECOPI). ICONTEC has offices in Chile, Costa Rica, Ecuador, Guatemala, Honduras, Nicaragua, Dominican Republic, and Peru.

ICONTEC’s technical standards development committees cover a wide range of issues and topics on metrology, occupational health, air, soil and water quality, solid waste, bar codes, conformity assessment, geographic information, environmental assessments, food and vegetable standards, and construction products, among others.  For a complete standards development committee list, please visit ICONTEC’s Technical Committees webpage.

NIST Notify U.S. Service
Member countries of the World Trade Organization (WTO) are required under the Agreement on Technical Barriers to Trade (TBT Agreement) to report to the WTO all proposed technical regulations that could affect trade with other Member countries. Notify U.S. is a free, web-based e-mail subscription service that offers an opportunity to review and comment on proposed foreign technical regulations that can affect your access to international markets.

Testing, Inspection, and Certification
Conformity Assessment
On November 20, 2007, the Ministry of Foreign Trade and over 90 private entities including product certifiers, product inspectors, and accredited testing, calibration and assay laboratories, enacted the creation of Colombia’s National Accreditation Organization (ONAC) as a public-private organization following the guidelines of the National Quality Policy and with the aim to allow international recognition of the country’s conformity assessment certificates including laboratory testing, and calibration certificates in accordance with ISO/IEC 17011 standards.

Per Decrees 4738 and 3257 of 2008, ONAC accredits and supervises the certification entities, as well as testing and calibration laboratories, a task previously assigned to the SIC, through the Delegated Superintendent for Consumer Protection (SDPC).

Product Certification
Manufacturers and importers of products regulated by official mandatory technical standards or technical regulations need to register themselves in SIC’s Mandatory Registry prior to selling products in Colombia. Products can be tested in accredited laboratories to obtain the certificate of conformity and SIC accepts certificates issued by accredited certification entities, such as members of the International Accreditation Forum (IAF) multilateral agreement.

The Ministry of Commerce, Industry and Tourism eliminated the mandatory status for the majority of products previously covered. SIC is working with other government agencies to develop technical regulations for products that present threats to health, safety, environment, or national security. Under WTO commitments, the Colombian government must submit draft technical regulations for comment prior to the new regulation’s entry into force.

Accreditation
Colombia’ National Organization of Accreditation (ONAC) has a detailed list of accredited entities such as inspection entities, personnel and product certification, clinical laboratories, calibration and assay laboratories, available at ONAC’s website.
The National Institute for Food and Medicine Vigilance (Invima)  oversees the National Sanitary Surveillance System and is the responsible organization regarding the accreditation of sanitary, biological products, medicines, food, beverage, cosmetics, and medical devices and products related to human health requirements.

Publication of Technical Regulations
The Ministry of Commerce, Industry and Tourism’s (MinCIT) Regulations Directorate is the WTO point of contact for TBT draft technical regulations, and upcoming Colombian notifications on TBT and SPS regulations. This group verifies compliance (and coordinates) with the WTO TBT Agreement, the SPS Agreement, and compliance with conformity assessment procedures and maintains an information system concerning national or foreign technical regulations, among other related matters.

Labeling and Marking
Specific marks or labels are not required for products, except for food, pharmaceutical, and textiles products. Labels on processed food products must indicate:

The specific name of the product, ingredients in order of predominance, name and address of manufacturer and importer, number of units, instructions for storage and usage (when required), expiration date, and other instructions as required by the Ministry of Social Protection or the Industry and Commerce Superintendent.  Labels and illustrations cannot be inaccurate or misleading.

Labels on pharmaceutical products must indicate in Spanish: "for sale under medical, dental, or veterinary prescription,” with the generic name, commercial name, net weight or volume, weight or quantity of active ingredients, license number, and the lot control number. For those products having limited shelf life, labels should include the date of expiration. Insecticides and other toxic products should display the skull and crossbones, the word "poison" in Spanish, and information regarding usage and antidotes. Products for which there are no antidotes cannot be licensed and can only be used in programs under the direct control of public health authorities.

The SIC oversees compliance with labeling and marking requirements of all products (imported or produced locally), including displaying the unit of measure using the international system of measurements. ICONTEC has developed several Colombian technical standards on labeling and marking requirements for different products.

The National Metrology Institute (INM), created by Decree 4175 of November 2011, provides calibration of metrology systems and provides technical training and coordinates activities with the International Legal Metrology Organization (OIML). The INM took the metrology responsibilities from SIC, and controls the national standard for the main physical properties (weight, volume, temperature, etc.) that serves as reference to the Colombian industry.

Contact Information
Ministry of Commerce, Industry and Tourism (MinCIT)
Daniel Rico
Point of Contact for Technical Barriers to Trade, Sanitary and Phytosanitary Measures (WTO/SPS)
Calle 28 # 13A-15
Bogotá D.C., Colombia
Phone: 571-606-7676 Ext.1690
Fax: 571-241-0480 | 571-241-0493
Email: puntocontacto@mincomercio.gov.co

Colombian Institute of Technical Standards and Certification (ICONTEC)
María Zulema Vélez
Executive Director
Carrera 37 # 52-95
Bogotá DC, Colombia
Phone: 571-607-8888
Fax: 571-222-1435
Email: direccion@icontec.org.co

Colombian National Accreditation Organization (ONAC)
Francisco Piedrahita - Executive Director
Mr. Gerardo Martínez - Technical Director
Carrera 7A # 69-64
Bogotá DC, Colombia
Phone: 571-742-7592 | 571-321-2938
Fax: 571-245-5112
Email: Francisco.Piedrahita@onac.org.co

National Metrology Institute (INM)
Hernán Álzate, Director
Avenida Carrera 50 # 26-55, Interior 2
Bogotá DC, Colombia
Phone: 571-254-2222
 
Superintendent of Industry and Commerce (SIC)
Alejandro Giraldo
Delegate for Control and Verification of Technical Regulations and Legal Metrology
Carrera 13 # 27-00, Piso 10
Bogotá DC, Colombia
Phone: 571-587-0021 Ext. 60001
Email: divacreditacion@sic.gov.co | grcontvigilancia@sic.gov.co
 
U.S. Commercial Service – Bogotá
Julio Carbó
Commercial Specialist & Standards Coordinator
Phone: 571-275-2723 | 571-275-2519
Email: Julio.Carbo@trade.gov

Prepared by our U.S. Embassies abroad. With its network of 108 offices across the United States and in more than 75 countries, the U.S. Commercial Service of the U.S. Department of Commerce utilizes its global presence and international marketing expertise to help U.S. companies sell their products and services worldwide. Locate the U.S. Commercial Service trade specialist in the U.S. nearest you by visiting http://export.gov/usoffices.



Colombia Market Access Trade Development and Promotion